> to the basket
view basket
© 2006 MAIER TL
deutsch english russian slowakish netherlands
Special Carbide Routers
   
catalog
Special Carbide Routers
X.6.45.6.1,5
artno: 100209-100221
see table below
 
     
 The KOHLE special carbide router with integrated guide roller is used for contour milling on different tablemounted edge milling machines.
Application range
steel, grey cast iron, Al, plastics
Advantages
  • better guidance due to integrated roller bearing guides
  • also available with pointed tip for deburring sharp corners
Option
  • various sizes available
  • many coatings available, e.g. BST-coating
  • special angle and models upon request
Included in delivery
  • 1 countersink incl. integrated guide roller
  
Shaft diameter
depending on model ø 6 mm and ø 8 mm
Chamfer angle
90°
Guide roller
depending on model from ø 4 mm to 9 mm
also available with guide shaft: ø 1,5 mm and ø 2,0 mm
Teething
depending on model, cross teeth or multi-teeth design

Accessories - excerpt from the delivery program

Please log in to order.
 
 Item no. Description I.D. no. Unit*
100209VHM-slot drill with shaft D=6 mm, D= 6x45°,
guide pin D=1.5		X.6.45.6.1,51
100210VHM-slot drill with shaft D=6 mm, D= 6x45°,
guide pin D=2		X.6.45.6.21
100211VHM-slot drill with shaft D=6 mm, D= 6x45°,
guide pin D=4 		X.6.45.6.2/41
100213VHM-slot drill with shaft D=6 mm, D=10x45°,
crossed-teethed, guide roller D=5		X.10.45.6.2/5K1
100214VHM-slot drill with shaft D=6 mm, D=10x45°, pointedX.10.45.6.2/5K BST1
100215VHM-slot drill with shaft D=6 mm, D=10x45°,
pointed		X.10.45.61
100216VHM-slot drill with shaft D=6 mm, D=6x45°,
pointed 		X.6.45.61
100217VHM-slot drill with shaft D=6 mm, D=12x45°,
multi-teethed design, guide roller D=8		X.12.45.6.3/81
100218VHM-slot drill with shaft D=6 mm, D=12x45°,
multi-teethed design, guide roller D=9		X.12.45.6.2/91
100219VHM-slot drill with shaft D=6 mm, D=16x45°,
multi-teethed design, guide roller D=6		X.16.45.8.3/6K1
100220VHM-slot drill –AI-Ox shaft D=8 mm, D=16x45°,
cross-teethed, guide roller D=7		X.16.45.8.3/7K BST1
100221VHM-slot drill with shaft D=6 mm, D=16x45°,
cross-teethed, guide roller D=7 		X.16.45.8.3/7K1
*Unit = packaging unit
Additional accessories, milling machines and special designs upon request.
Technical specs may change.